Public EV chargers operate outdoors in direct sunlight, rain, dust, and temperature swings from -30°C to +80°C. Consumer-grade displays fail in these conditions---they wash out in bright light, lag in extreme cold, and leak when rain hits the front panel. Our 10.1-inch open-frame monitor is built to survive these real-world conditions, specifically for AC and DC charging stations.
The monitor handles all core charging HMI functions: session selection, RFID authentication, QR code scanning, payment confirmation, real-time power readout, fault indication, and remote diagnostics. For commercial charging networks, it also supports advertisement playback during idle periods. We have supplied this display to charging infrastructure manufacturers across Europe and Asia for both on-street and highway deployment.
Unlike consumer-grade displays, 10.1 Inch Open-Frame Touchscreen Monitor is engineered for continuous, uninterrupted operation. The industrial-grade IPS panel features ultra-wide viewing angles, low power consumption, and a long service life. The PCAP multi-touch sensor ensures smooth gesture operations and offers optional features like glove touch, waterproof touch tuning, and anti-fingerprint surface treatment. The metal open-frame design supports front or rear embedded mounting and provides excellent heat dissipation, making it easy to integrate into charging cabinets.
For harsh outdoor installations, the product offers multiple upgrade options, including a wide operating temperature range (-30°C to +80°C), optical bonding, UV-resistant cover glass, IK impact resistance, anti-glare (AG) and anti-reflection (AR) coatings, an optional IP65 waterproof front panel, EMC optimization, and an anti-vibration structure. These enhanced configurations guarantee reliable performance against direct sunlight, rain, dust, and extreme temperature fluctuations.
Size: 10.1"
Panel: Industrial IPS TFT LCD
Resolution: 1280×800 (customizable)
Touch: Projected Capacitive Multi-Touch
Surface Hardness: 7H
Brightness: 300-1000 nits optional
Installation: Open Frame
LED Life: 50,000+ hours
The charging station display serves as the primary interactive interface between users and the charging equipment, and every touch operation directly impacts the user experience.
Our 10.1 Inch Open-Frame Touchscreen Monitor is ideally suited for the following applications: charging session selection, user authentication, QR code scanning interface, RFID card operation, mobile payment confirmation, charging status monitoring, energy consumption display, fault diagnosis interface, remote maintenance interface, as well as advertising and information broadcasting.
Even after millions of touch operations, the display maintains exceptionally high responsiveness, making it the ideal choice for unattended public charging infrastructure.
| Industrial LCD Panel |
- High reliability TFT LCD - Long operating lifetime - Wide viewing angle - Optional 1000+ nits sunlight readable brightness - Low power consumption |
| Projected Capacitive Touch |
- Multi-touch support - High touch accuracy - Smooth gesture operation - Supports glove touch - Waterproof touch tuning available - Anti-fingerprint surface |
| Rugged Open Frame Design |
- Easy front or rear mounting - Metal housing - Stable mechanical structure - Suitable for kiosk integration - Excellent heat dissipation |
Every customer has unique mechanical and electrical requirements, and we offer comprehensive customization services:
| LCD Display Options |
- Brightness customization - Resolution selection - Wide viewing angle LCD - High contrast panel - Sunlight readable display |
| Touch Options |
- PCAP multi-touch - Cover glass thickness - Silk printing - AG/AR/AF surface treatment - Waterproof touch - Glove operation - Palm rejection |
| Mechanical Customization |
- Open frame dimensions - Mounting brackets - Bezel design - Metal housing - Customized cable routing |
| Interface Options | HDMI/VGA/DVI/DP/Type C/DC Power Input |
Critical Design Considerations for EV Charger Displays
Unlike indoor touch monitors, charging station displays face unique field conditions that directly impact user trust and operator revenue.
Sunlight Readability: Standard 300-nit displays are unreadable outdoors. We offer 1000-1500 nits panels with optical bonding and AR coating to maintain visibility in direct sun. Without these, users cannot read QR codes or confirm payment---leading to abandoned charging sessions.
Temperature Extremes: Chargers operate in deserts and alpine regions. Our -30°C to +80°C certified components ensure LCD response time and touch sensitivity remain consistent year-round. No pixel lag in winter; no overheating in summer.
Rain and Dust Ingress: IP65 front sealing prevents water ingress during hose-down cleaning and heavy rain. Without proper sealing, moisture causes touch drift and LCD delamination within months.
Glove Operation: EV drivers wear gloves in cold weather. Our PCAP firmware is tuned for both bare-finger and glove touch without compromising sensitivity for either mode.
Vandal Resistance: For unattended public stations, IK-rated cover glass resists impact from dropped charging handles and deliberate tampering.
Service Life: Charging stations have 10+ year deployment cycles. Our displays use industrial-grade components rated for continuous outdoor operation, avoiding premature replacement costs for infrastructure operators.
We have extensive industry experience in supplying touch displays for EV charging stations, industrial automation, medical equipment, and self-service terminals. All core manufacturing processes, including touch lamination, optical bonding, and final aging tests, are completed in-house. Before shipment, every single unit must pass rigorous high-low temperature cycling, vibration, and continuous aging tests. Additionally, our team provides comprehensive engineering support throughout the entire process, from prototype validation to mass production.
Every monitor undergoes strict quality testing before shipment, including a series of verifications such as touch calibration, display inspection, aging test, vibration test, functional verification, and packaging inspection, to ensure the integrity of the final delivery.
A: Yes. We provide comprehensive OEM and ODM customization services, covering dimensions, mounting methods, interfaces, brightness, and touch specifications.
A: Yes. For outdoor charging stations, we offer optional high-brightness LCDs, optical bonding, anti-glare glass, UV protection, and IP65-rated front panels.
A: Yes. Our projected capacitive touch panels can be specifically optimized to support glove operation.
A: Yes. Depending on project requirements, we offer display options with brightness levels up to 1000-1500 nits.
A: Common interfaces include HDMI, VGA, DP, DVI, and USB Touch. Customized interfaces are also supported.
A: Yes. This monitor is designed for reliable 24/7 industrial operation.
A: Products can be designed to comply with CE, RoHS, REACH, and other project-specific regulatory requirements.
A: Yes. We offer customization options including silk-screen printing, logo printing, black borders, and custom graphics.
A: Standard models support low-volume orders, while OEM projects are evaluated based on specific customization requirements.
A: Yes. Our engineering team provides comprehensive support throughout the entire process, from concept design and prototyping to mass production.
If you need a custom 10.1 Inch Open-Frame Touchscreen Monitor, please feel free to contact us.
Please provide the following specific requirements: resolution, brightness, touch type, interface type, mounting dimensions, indoor/outdoor application, target certifications, and estimated annual volume.
Our engineers will provide professional technical recommendations, product drawings, and highly competitive pricing to help accelerate your product development.
Factory Address: No. 39, Tangkeng 2nd Road, Tangkeng Community, Biling Sub-district, Pingshan District, Shenzhen
Year Established: 2009
Factory Scale: Area of 3,000+ square meters / 50+ employees
Key Certifications: ISO9001, ISO13485, IATF16949
WhatsApp: +86 150 0209 4095
Address
No. 39, Tangkeng 2nd Road, Tangkeng Community, Biling Sub-district, Pingshan District, Shenzhen City, Guangdong Province, China
Tel
